Installation of Geogrid

Installation of Geogrid – The advancement of geotextile technology led to the creation of the sheet-shaped geogrid innovation, which can be used to reinforce the soil structure. One kind of geosynthetic material is stiff, has a strong contour, and has numerous openings. This method of installing geogrids is obviously different from installing geotextiles.

Geogrids can be used to build roads with soft contours and stretching broken rocks in a certain size. If the soil is essentially flat-shaped, it would be better if geotextiles were combined under the geogrid. Geogrids are employed, particularly in areas with poor or unstable soil conditions, to improve the strength and stability of the soil. Additionally, by shifting the load to the ground below it. The geogrid helps to lessen the load on buildings and road structures.

Functions of Geogrid

  • Soil Stabilization
  • Balance the spread of the load from the top to the ground layer below so that it can avoid the occurrence of local land falls (differential settlement)
  • Increase the power of the soil
  • Prevents falling due to cracks and flakes on the soil.
  • Reduces costs and is excellent for maintenance.

ALSO READ : Method of Working Cast Plastic Installation

Installing the Correct Geogrid

Installation of Geogrid

Even though you are aware of the benefits and value of a geogrid, you are unable to install it from the ground up. Special guidelines and instructions must be carefully followed in order to install geogrids. The geogrid’s advantages and features can be optimized, making this possible. The following is a list of typical steps for installing geogrids. We have combined several widely used methods.

  1. Find the area where the geogrid will be used. Make sure there are no stones or other obstructions in the area.
  2. Drag the geogrid over the prepared area. Ensure that the geogrid is firmly planted.
  3. To the necessary size, cut the geogrid.
  4. Connect the geogride to the ground floor using a geogrid clamp or nail. For the geogrid, clamps or nails should be separated in accordance with the manufacturer’s instructions.
  5. The top layer will be covered with soil or tiny stones by the geogrid. To avoid movement or the coating material sinking into the geogrid, make sure it is firmly pressed.

In addition to providing Geogrid products with the best quality, we also sell a few other geosynthetic products that we sell such as: Cocomesh, Plastic Cor, Geocell, Geotextile Non Woven, Drainage Cell, Geobag, etc. To see our products please click here.

We also provide installation services or installation of other geosynthetic materials on-site, supported by experienced and certified installers. If you are interested, you can contact us immediately.